Details
Position： Home > Details
Precautions for the use of electric water heaters
Category：
Date：2021-12-3 10:51:29
Click：
Author：佚名
1. When opening the mixing valve to take a bath, the nozzle should not directly face the human body. Use it when the water temperature is adjusted to the right level to avoid discomfort to the user if the water temperature is too high or too low. 4. Before the water heater is energized and used, it must be ensured that the inner tank of the water heater is filled with water. Otherwise, it will cause the water heater to burn out, damage the heating tube, and cause the thermostat to trip.
1. When opening the mixing valve to take a bath, the nozzle should not directly face the human body. Use it when the water temperature is adjusted to the right level to avoid discomfort to the user if the water temperature is too high or too low. When taking a bath, make sure that the sprayed water does not spill onto the water heater to prevent the internal circuit of the water heater from being damp and causing a short circuit. Cause danger.
2. After you take a bath, first keep the nozzle away from the human body, then close the mixing valve, turn off the power of the water heater, and dry the water in the nozzle at the same time. And hang the nozzle on the nozzle support.
3. If the user does not use the water heater for a long time, the water in the inner tank of the water heater should be drained to prevent the deterioration of water and the appearance of peculiar smell and the scale of the inner tank. Drainage method: first close the tap water inlet valve, then move the water heater mixing valve to the hot water, and then move the safety valve handle up to the horizontal position. At this time, the water in the water heater tank will flow out through the pressure relief port of the safety valve. It flows into the sewer through the drain pipe.
4. Before the water heater is energized and used, it must be ensured that the inner tank of the water heater is filled with water. Otherwise, it will cause the water heater to burn out, damage the heating tube, and cause the thermostat to trip. Water injection method: Turn the mixing valve to the hot water, and then open the tap water inlet valve. When the sprinkler continuously emits water, it indicates that the water in the tank of the water heater is full, and then it can be energized for heating.
2. After you take a bath, first keep the nozzle away from the human body, then close the mixing valve, turn off the power of the water heater, and dry the water in the nozzle at the same time. And hang the nozzle on the nozzle support.
3. If the user does not use the water heater for a long time, the water in the inner tank of the water heater should be drained to prevent the deterioration of water and the appearance of peculiar smell and the scale of the inner tank. Drainage method: first close the tap water inlet valve, then move the water heater mixing valve to the hot water, and then move the safety valve handle up to the horizontal position. At this time, the water in the water heater tank will flow out through the pressure relief port of the safety valve. It flows into the sewer through the drain pipe.
4. Before the water heater is energized and used, it must be ensured that the inner tank of the water heater is filled with water. Otherwise, it will cause the water heater to burn out, damage the heating tube, and cause the thermostat to trip. Water injection method: Turn the mixing valve to the hot water, and then open the tap water inlet valve. When the sprinkler continuously emits water, it indicates that the water in the tank of the water heater is full, and then it can be energized for heating.
Weibo
WeChat
Enterprise OA
